仪器校准失败

校准包括波长、位置和泵校准,每年一次,仪器搬动后也要做。

仪器还没适应室温

  1. 开箱后让仪器在室温下放至少 3 小时,再做首次校准

出处:官方手册 Lunatic User Guide (Oct 2026) p.7;官方手册 Lunatic User Guide (Oct 2026) p.14

没用校准板

  1. 按软件提示装上 Lunatic 校准板(701-2013)
  2. 首次装机没有校准板,联系当地 Unchained Labs 代表

出处:官方手册 Lunatic User Guide (Oct 2026) p.14;官方手册 Lunatic Software User Guide (Oct 2026) p.16;Lunatic 仪器校准板

需要工程师排查

做校准会让之前存的 Stored blank 失效

  1. 点 View calibration reports,保存这次校准报告
  2. 填上出错的日期和时间,点 Export logs 导出日志
  3. 把出问题时的实验和出问题前最后一次正常的实验导出、打包
  4. 把日志和实验压缩包发给当地 Unchained Labs 代表或 support@unchainedlabs.com

出处:官方手册 Lunatic Software User Guide (Oct 2026) p.16;官方手册 Lunatic Software User Guide (Oct 2026) p.17;官方手册 Lunatic Software User Guide (Oct 2026) p.70