# 封膜贴不严，孔口有液体

- 网址:https://unchainedlabs.help/troubleshoot/aunty-seal-leak

封膜起皱、翘边，或贴膜前后孔口有样品。

## 加样过量

加样超过 8 µL，封膜就贴不严

1. 每孔只加 8 µL，保持孔口干净
2. 加完再贴封膜

出处:官方手册 Aunty Instrument User Guide revB p.20;[枪头对准进样口，样品顺畅流入孔内](https://unchainedlabs.help/product/aunty/resources/ug-plate)

## 封膜重复使用

每张封膜只能贴一次

1. 揭下的封膜不再用
2. 补加样品后贴一张新封膜

出处:官方手册 Aunty Instrument User Guide revB p.21;[封膜对齐、压实，再撕掉拉片](https://unchainedlabs.help/product/aunty/resources/ug-plate)

## 封膜没对准或没压实

1. 只封部分芯片时，撕背衬前先沿打孔线分开封膜
2. 捏住拉片，把封膜对准样品孔，放下后向下压实
3. 撕掉拉片
4. 加了样的芯片全部封好再上机

出处:官方手册 Aunty Instrument User Guide revB p.21;[封膜对齐、压实，再撕掉拉片](https://unchainedlabs.help/product/aunty/resources/ug-plate);[上机前确认两件事](https://unchainedlabs.help/product/aunty/resources/ug-plate)
